Product Description
K1 Spray+ is designed for render spray machines as well as hand application. It is suitable for both new build and refurbishment projects. K1 Spray+ is available in 20 standard colours. When applied according to manufacturer’s instructions, K1 Spray+ will provide an attractive, low maintenance finish.
One Coat Coverage:
1.6 kg / mm thick / sq m
APPLICATION
- K1 Spray+ is designed for render spray machines as well as hand application.
- Add material to the feeding hopper and adjust water supply to achieve the desired consistency. Open time - approx one hour
- For hand application, add 4 - 5 litres of clean water per 25kg sack
- Mix thoroughly with drill and whisk for at least 10 minutes to break down the additives.
- Do not polish
- Small areas such as quoins and window reveals may be finished smooth
- Use polythene sheeting to protect doors, windows and other features from any over spraying during application
FIRST PASS
- Using a 12mm or 14mm diameter mortar nozzle, spray K1 Spray+ directly on to the prepared wall surface to the required thickness of 4 - 8mm
- Level out immediately, using a straight edge, smoothing trowel or float
- Allow the first pass to stiffen before applying the second pass, the time passes being shorter in warm dry conditions, and much longer in extreme wet conditions
SECOND PASS
- Use 8mm or 14mm diameter spray nozzle according to the finish required. The normal recommended finished thickness of most finishes is between 12 - 14m
